William Dunkley

Setting up Voltage (BD71847) on IMX8M mini IOT Core

Discussion created by William Dunkley on Mar 31, 2020
Latest reply on Apr 7, 2020 by William Dunkley

I haven't been able to find very much information on where and when the code that sets up the PMIC.  I'm using Windows IOT Core currently.

1. Where is the code stored that sets up the chip

2. What is used to edit that code

3. I'm currently reading through the manual(I still have a few weeks until the board I made shows up) is there another resource that more specifically discusses the initial setting up of an IMX8M chip that didn't come from NXP. (I have the ram part figured out using Mscale DDR tool)