Skip navigation

News

Top & Trending
Nitin Kanani
Hello Team, i have ADC driver version 2.3.1.  I used ADC0 channel number 4 and 5 if i changed value of channel 4 using potentiometer that is affect channel number 5 so i didnot getting actual result of  channel number 5. i attached source code. so plz review it. let me know if any solution for that.  
0

Xiaofeng wei
Note that evkbimxrt1050_aws_remote_control_enet example disables D-Cache by calling SCB_DisableDCache() in main() function. We wanna enable it to promote performance in our project, but we met net issue. How to fix it. BTW, using SDRAM in our project. 
2
Top & Trending
Filip Žigun
Hello, Peter Vlna   I have an issue when initializing FCCU, NCF_S[0] - Temp Sens 0/1 can't be cleared like other status flags. I see in reference manual that this status is set by PMC and I tried to clear it by disabling TSx_AOUT_EN and TSx_DOUT_EN clearing ESR_TD flags and then enabling TSx_AOUT_EN and
2
Top & Trending
Jang poo reum
I want to use resolver interface using eTPU in MPC5676R. I want to generate a square wave using the fs_rslv_init function according to AN3943 documentation. I initialized it as shown in the document, but no square wave is generated. The code is written as below. I would like to know if there are any additional settings to make square waves here.
0