• iMX8M display shifted after playing decoded video with gstreamer

    Sometimes after playing decoded video with a gstreamer pipeline the display (including most but not all windows) gets shifted maybe 5 to 10 percent with the right side wrapping around to the left side (pictures attach...
    Michael Erwin
    last modified by Michael Erwin
  • IMX6 Xorg HwAccel Crashes

    I am having extreme difficulty getting X working with hwacceleration. I have followed a bit of a different route than you and there is good reasons for that. I have a debian 9 debootstrapped system with all the requir...
    Nico Du Toit
    last modified by Nico Du Toit
  • IMX.6 TVIN signal lock lost Algorithm for 4.1.15

    There is a patch in NXP application note "i.MX6 IPU TVIN Application note" REV 0, 8/2016, has anyone has working patch for Android 4.1.15?
    Willie Niou
    last modified by Willie Niou
  • Is possible to configure i2c sensor to the M4 in the A7

    Hello, Is possible to configure i2c sensor to to the M4 (freertos) in the A7 (linux)? I think the answer to the question is true. But I think that I must use the RDC like examples freeRtos. But in linux I...
    last modified by delauratfrançois
  • Dlib detector call is too slow in IMX8QXP

    Hi, I'm trying to test dlib "webcam_face_pose_ex" example in IMX8QXP board. The below code is taking 2161 millisecond approximately. And CPU is more than 120% cv_image<bgr_pixel> cimg(temp); std::vector<recta...
    arun kumar
    last modified by arun kumar
  • Hummingboard/Custom Carrier Board IoT Boot Issues

    This thread continues an earlier email conversation between a number of parties. It relates to IoT Core boot freezes where a Quad Core iMX6 Hummingboard has been placed in a third-pa...
    Andrew Kissling
    last modified by Andrew Kissling
  • i.MX 8

    hi I want to whether there is any windows environment development IDE for i.MX 8 mini, and also Is it FLEX SPI can be used as normal single data line SPI.
    nayana n
    last modified by nayana n
  • Step-by-step: How to setup TI Wilink (WL18xx) with iMX6 Linux 3.10.53

    Hello everyone,   I'm sharing my experience bringing-up a TI Wilink Module (WL18xx) on iMX6 Linux 3.10.53   You can find a lot of information here: WL18xx - Texas Instruments Wiki And iMX6 instructions ...
    Erez Steinberg
    last modified by Erez Steinberg
  • Enabling Mobile_network & RIL related Settings support for iMX6 based on Android 8.0 or 7.0 etc

    Hi All,   I was trying to integrate 4G Modem on iMX6dl running Android Oreo 8.0. but surprisingly the default BSP from nxp comes with WiFi-Only Device settings, which will not show any UI related settings for Mob...
    Prasanna Kulkarni
    last modified by Prasanna Kulkarni
  • Example code on blob generation and usage on i.MX6UL platform

    Attached is example code on blob generation and usage on i.MX6UL platform. It shows how to generate blob in secure memory, store blob in non-volatile memory, restore key from blob and use in cryptographic algorithm, t...
    Eric Chu
    last modified by Eric Chu
  • 使用10-bit raw data camera在imx6q mipi上,遇到偶發性畫面錯誤重複問題

    在imx6q  mipi上已經成功移植AR0521 8-bit RAW data camera. 因需求想把 AR0521 8-bit BPP 改成    AR0521  10-bit BPP, 在微小修改後畫面有出來. 但每隔幾秒在畫面開頭有出現錯位 重複的現象(詳情請見zip附件).   在問題發生後,嘗試調整camera sensor regiser. 發生問題完...
    Weihung chen
    last modified by Weihung chen
  • Installing libGL and friends for Linux 4.9

    This is a how-to for installing GPU binaries for X11 so it can use the Vivante drivers.   Make sure your environment variables are set correctly as there will be lots of cross compiling :-)  See the en...
    Nate Sigrist
    last modified by Nate Sigrist
  • rt 1020 evk swo trace

    Is it possble to make swo instruction trace with imx rt 1020 evk in mcu expresso ide? If yes how i can configure it? i have Jtag edu. Thx.
    Ladislav Sopko
    last modified by Ladislav Sopko
  • DTS file GPIO configuration tool for iMX8

    Hi, We are new to iMx8dx/qxp processors, We are looking GPIO configuration for DTS file for the different peripherals Could you please help me any tool or application to configure the GPIO's for iMX8dx and iMX8qxp p...
    viswanath kondapalli
    last modified by viswanath kondapalli
  • Dual camera & dual display working on MYIR's MYD-JX8MX Dev Board

    MYD-JX8MX development board (http://www.myirtech.com/list.asp?id=608) based on NXP i.MX8M quad processors provides powerful multi-media functions including dual displays, dual cameras, high-quality audio, etc. Th...
    Kiddy Xu
    last modified by Kiddy Xu
  • debootstrap Debian Buster on imx8mminievk

    This guide will show you how to debootstrap Debian Buster on imx8mminievk on a SD-card, but will very likely help you on other systems as well. First you need a Linux installation present on the imx8mminievk.   ...
    Andreas Gustafsson
    last modified by Andreas Gustafsson
  • e-CAM130_iMX8M - 13MP Auto Focus Camera Board for i.MX8

    e-CAM130_iMX8 is a 13MP 4-lane MIPI CSI-2 autofocus camera board for Variscite's DART-MX8M Evaluation kit (VAR-DVK-DT8M). This iMX8 camera can be directly connected to the serial camera connector (J11) of the VAR...
    Dharma Lingam
    last modified by Dharma Lingam
  • i.MX6 GStreamer-imx Plugins - Tutorial & Example Pipelines

    The Freescale i.MX6 has many video capabilities that are best accessed through GStreamer.   Gateworks, the leading supplier of Powerful ARM based Single Board Computer solutions using the Freescale i.MX6, has in...
    Ryan Erb
    last modified by Ryan Erb
  • How to transfer files between Windows PC / Ubuntu and the development board

    Video demonstration: Tutorial 3.3 How to transfer files between Windows PC / Ubuntu and the development board   How to connect Ubuntu to the Internet? Run Oracle VM VirtualBox (this is what I am using, you ...
    Kiddy Xu
    last modified by Kiddy Xu
  • Dual OpenGL application v-sync issue on i.MX6Q

    Hi, we got an issue about i.MX6 dual OpenGL applications (render to two framebuffers).   Customer board based on i.MX6Q sabresd. Linux BSP GPU driver and sdk: L3.0.35_4.0.0   fb0: PAL TVout, refresh rate 5...
    Frank Chen
    last modified by Frank Chen