• Bluetooth Profile for Android 9

    Dear NXP,   I am working on i.MX 6Quad SABRE-SD with Android 9. I am using Broadcom BCM4339 - BT & WiFi Combo. I needs to add some more Bluetooth profile to this module for Android 9.  &#...
    vinothkumar s
    last modified by vinothkumar s
  • Android6.0 mfgtool repeat Loading U-boot

    Hi  all,       I'm using an imx6d modified board and intend to burn Android 6.0. (1)After referring to the Android_User's_Guide.pdf document,I have build the Android platform for i.MX6. (2)I downlo...
    zhang Daniel
    last modified by zhang Daniel
  • How to build vmlinuz with initramfs

    Currently we build zimage with initramfs bundled, i am trying to debug the kernel using lauterbach for which we build vmlinuz. But i need to bundle vmlinuz with initramfs, how to build vmlinuz with initramfs.
    last modified by niranjanbc
  • I2C deadlock imx6 imx8

    Hi,All I used the board customized by imx8mq and developed the code from imx8mq_evk.Encountered a problem: reboot when the i2c SDA pulled down after failed to restore the i2c lethal lock. I observed the board of imx8m...
    last modified by dhty2015@outlook.com
  • Android系统AudioFlinger对录音数据处理

    你好:          请问使用Android 4.4.2系统自带录音机进行录音时,音频文件中数据出现消顶情况(响度值超过24000部分全部消去了),是不是因为是Android的AudioFlinger中对录音的PCM数据做了处理呢?    我做了下述实验进行排除定位问题:   ...
    xcy here
    last modified by xcy here

    Hi,   I'd like to confirm REFTOP_PWD bit configuration in PMU_MISC0n register. I think like below. 0: Power-Up 1: Power-Down   Is this correct?   Best Regards, Sugiyama  
    Toshishisa Sugiyama
    last modified by Toshishisa Sugiyama
  • Micro-Processor for DAC And ADC

    Hi All,   We are Designing ultrasound device for that we are using dual channel, high voltage Transmitter(TX517) and DAC(ADS4128). can anyone suggest me a  IMX 6 or any other micro- processor  part...
    Ashok b
    last modified by Ashok b
  • Android OTA update fail when increased the system.img size

    Dear NXP,   I am working on IMX6Q with Android 7 for OTA update. Current system.img size 499 MB with this OTA update work. I increased this due to compilantion error. If system.img is above 499 MB ota update fail...
    vinothkumar s
    last modified by vinothkumar s
  • i.MX6 GStreamer-imx Plugins - Tutorial & Example Pipelines

    The Freescale i.MX6 has many video capabilities that are best accessed through GStreamer.   Gateworks, the leading supplier of Powerful ARM based Single Board Computer solutions using the Freescale i.MX6, has in...
    Ryan Erb
    last modified by Ryan Erb
  • iMX8M MIPI-CSI 4-lane configuration

    Hello,   I came across an odd behavior of the iMX8M processor's MIPI-CSI camera input. I have an AR0330 imager, which I wrote a driver for, and is working pretty neat.   The problem is, it only works if I...
    Krisztian Bakos
    last modified by Krisztian Bakos
  • Why Imx6q  ethernet is too slow?

    Hello  Everyone   I have tried several methods to test the ethernet communication of the Imx6 card.   1) When I ping in my computer from IMX6, the ping does not reach the IMX6. But when I ping to imx6...
    Muhammet Emin ŞAHİN
    last modified by Muhammet Emin ŞAHİN
  • Install Galcore Module in linux-4.14.126

    I have installed Galcore as separate module for linux-4.14.126 for i.mx6dl bsp. It is not able to create device entry as "/dev/galcore" untill i disable etnaviv-drm in makemenuconfig and place older (linux-4.14.46)gpu...
    Ankit Kumar Singh
    last modified by Ankit Kumar Singh
  • SABRE Board Power-Up Sequence

    Hi dear all. I am going to design a custom board base on i.Mx6Q processor. I choose "SABRE Board for Smart Devices Based" as my reference design. I have checked the Power supply page (Page19) , PMIC part number that ...
    saeid fallah
    last modified by saeid fallah
  • imx6q udhcpc 获取IP问题

    使用imx6q与4G模组(AG35)做上网功能。硬件连接方式为SGMII。AG35配置后,电脑直连可以正常获取IP和上网。 imx6q与路由器网线直连也可以正常获取IP和上网。 同时,imx6q使用4.1.15(官网)的内核和文件系统,直连AG35,udhcpc命令也是可以正常获取IP和上网。 但是,imx6q使用4.9.88的内核和文件系统,直连AG35,udhcpc命令却不能获取IP。 从使用4.1.15版本来看,硬件...
    一笑 独孤
    last modified by 一笑 独孤
  • imx8 fastboot and UUU tools

    I used imx8mq, android 9.0.In the uboot, I use fastboot 0 to enter the fastboot mode, and I can use the UUU tool to download the firmware.However, in the Windows CMD environment, using fastboot devices does not see an...
    last modified by dhty2015@outlook.com
  • 4.9.88版本内核yocto 生成的rootfs下usr/include为空

    大神们,好, 以前编译4.1.15的版本内核,生成的rootfs下usr/include都有相关头文件。 但是最近在Ubuntu下编译4.9.88版本内核yocto 生成的rootfs下usr/include为空。 看bb文件也没看到啥差异。 但是在 /home/ubuntu/imx-yocto-bsp/build/tmp/work/imx6qsabresd-poky-linux-gnueabi/core-image-minim...
    一笑 独孤
    last modified by 一笑 独孤
  • ar8031

    版主 你好,  参考MCIMX6DQ-SDB 设计一个板子,ARM6可以配置ar8031  IP地址等,但是没有物理连接,AR8031时钟、各级电压都正常
    song yang
    last modified by song yang
  • Quick and dirty setup of an i.MX evaluation board to program an i.MX board thru USB

    i.MX evaluation board can be a simple solution to program i.MX boards in a factory for instance. i.MX evaluation board are not for industrial usage, but you can find plenty of cheap i.MX insdustrial boards on the web...
    last modified by vincent.aubineau
  • How to add/install packages into timesys toolchain?

      I am trying to add few packages into my toolchain such as directfb busybox etc. This project uses imx6dl sabresd and linux kernel.   Two of the packages namely "fbgrab" and "mx53DFBModules" were prod...
    Sujay S
    last modified by Sujay S
  • Measure (RAW) NAND flash performances

    Using a RAW NAND is more difficult compared to eMMC, but for lower capacity it is still cheaper. Even with the ONFI (Open NAND Flash Interface) you can face initialization issue you can find by measure performan...
    last modified by vincent.aubineau