• Certain networking packets cause memory leaks in Windows Embedded Compact 7 on i.MX53

    I have been tracking an elusive bug that causes the system to become unresponsive.   It has been proved that the bug is in the Ethernet area of the i.MX53 WinCE7 BSP which happens in certain network environments...
    Eugen Feraru
    last modified by Eugen Feraru
  • VIH/VIL for i.MX8M GPIO

    Dear all,   Product data sheets such as i.MX6 and i.MX8X have the following note regarding VIH / VIL.   *This is an excerpt from i.MX8X datasheet(https://www.nxp.com/docs/en/data-sheet/IMX8QXPAEC.pdf...
    George Fukutomi
    last modified by George Fukutomi
  • MX53 EIM clock frequency

    Hi, Is it possible to change MX53 EIM clock frequency? If yes please let me know how to change it. I checked the MX53 reference manual. The EIM clock is the same as aclk and axi clock. It seems we can not configure ...
    Frank Chen
    last modified by Frank Chen
  • Why is MFG tool crashing (i.MX53)?

    I.MX53  Manufacturing tool  Problem      New  install  on Windows 10 Pro PC I downloaded the  Mfgtool file recommended for i.MX53 processors from the NXP website I r...
    Brian Peters
    last modified by Brian Peters
  • i.mx535的开发环境搭建

    请问哪边可以下载到i.mx535的编译器 还有qt4.8.7的环境搭建的教程 急需 谢谢
    caifa Guo
    last modified by caifa Guo
  • how to build qt4.8.7 for i.mx535

    I need qt4.8.7 now.
    caifa Guo
    last modified by caifa Guo
  • PCIe: Virtual channels

    Hey all,   I need to know which NXP MCUs/MPUs supports more then one Virtual Channel (VC) for PCIe.   I need to realize isochronous data transfers over PCIe.   Thanks in advance!
    Julian Dietrich
    last modified by Julian Dietrich
  • rs485 in imx53 board

    Hi Yuri,   I see this issue is quite old but we are still having some problems. In your answer, you say that "Additional software is needed to check when all data bits are really sent to line." Can you explain h...
    Alvaro Gamarra
    last modified by Alvaro Gamarra
  • can not run mxc_vpu_test.out [imx53]

    Dear NXP: We are using imx53 platform in our product. Now I am testing "mxc_vpu_test.out" app but failed. *********************************************************** Machine: Machine: Freescale MX53 LOCO Board CPU: CP...
    alex zhu
    last modified by alex zhu
  • how to enable rs485 in imx53 board

    Hi all,   presently, i am using imx53 board its baurdrate is 115200 and its rs232 communication. but i want rs485 communication and baurdrate is 460800 anyone please help me how can i enable rs485 communication...
    YENNI VENKATESWARA RAO
    last modified by YENNI VENKATESWARA RAO
  • Problem with adv7180 decoder on IMX6 Android (black screen) ERROR: v4l2 capture: mxc_v4l_dqueue timeout enc_counter 0  VIDIOC_DQBUF failed.  mxc_ipu mxc_ipu: IPU Error - IPU_INT_STAT_5 = 0x00000001

    Hello All! Continue from this Problem with adv7180 decoder on IMX6 Android (black screen)  Idon't know why is marked As Solved, but this not solved!   Have i.MX 6Quad Freescale SabreSD with Andro...
    Ma Juani
    last modified by Ma Juani
  • Use gstreamer to transcode MP4 file to ts file erro

    Hi all,      I use gstreamer to transcode MP4 file to TS file  has the following erro(At present, only this MP4 file has this problem):     *** Error in `./gst_transcode': re...
    建桥 丁
    last modified by 建桥 丁
  • Capturing RAW PCM DATA in Imx6

    Hi All,   I am having our custom board which is having imx6d processor.In this we connected Telephony chip(Le9641) which will receive and transmit PCM samples.It is having internal audio processing units which w...
    saisurya narayan
    last modified by saisurya narayan
  • SARBE - iMXS6X-SDB: ethernet - Link is Down

    Hi Team, i am working on iMXS6X-SDB board with our custom linux kernel image version 3.14.28. I have some python reboot tests which gives the reboot command via ssh, waits for some time and this cycle repeats. &...
    PRANAV MONDHE
    last modified by PRANAV MONDHE
  • Why is i.MX53 BulkIO device changing to USB Mass Storage device when I run MFG tool?

    Running  MFG tool  rev 1.6.032  on a windows 10 upgrade of a windows 7 PC with no usb3 ports, every thing is configured correctly best I can tell.  The target board shows up as a  'Freesc...
    Brian Peters
    last modified by Brian Peters
  • MX53_QSB_UBUNTU_SD_DEMO_IMAGE

    Hi everyone,   I need to get an old VIA VAB800 Board working and there I need the mentioned image which was referenced by ht installation instructions and directed to a webpage from freescale. http://cdn.viaem...
    Peter Kampmann
    last modified by Peter Kampmann
  • RGMii Signal Spacing 1000b 125Mhz

    It is accepted that cross talk is generally reduced when S >3W or S>5W for aggressive lines as a rule of thumb. Are general constraints in regard to  RX/TX Data[3..0] trace spacing applicable to RGMii when...
    DAVID SABALESKY
    last modified by DAVID SABALESKY
  • Useful documents and threads of i.MX Processors

    The following document contains a list of document, questions and discussions that are relevant in the community based on amount of views. If you are having a problem, doubt or getting started in i.MX processors, you ...
    Erik Bustos
    last modified by Erik Bustos
  • How to run CVE checker on yocto image for iM6SX

    Hi Guys We are using customized yocto linux kernel and running some C++ code for industrial application.   Where i can find CVE (Common Vulnurabilites and Exposures) tools to check for my custom-ed yocto i...
    PRANAV MONDHE
    last modified by PRANAV MONDHE
  • iMX6S Sabre - Frequency stop was detected, probably due to a supply voltage drop

    Hi Guys I am running iMX6 Sabre board with latest yocto image running our C++ software on top of it. While testing, i understand that we are getting frequency stop messages on dmesg   Can you please go through...
    PRANAV MONDHE
    last modified by PRANAV MONDHE